Sign In | Join Free | My enlightcorp.com |
|
Basic standards for wire harness production :
IPC / WHMA - A - 620B
Electrical performance 100% test
Crimping control parameter
A:Crimp height
B:Crimping width
C:Terminal section analysis
IPC / WHMA - A - 620B
Requirements and Acceptance for Cable and Wire Harness Assemblies
Final Draft for Industry Review February 2012
Table 1 - 1 Electrical Clearnace
Voltage | Set* | Clearance |
Up to 64 |
A B C |
1.6mm [ 0.062in ] 3.2mm [ 0.125in ] 3.2mm [ 0.125in ] |
Over 64 - 600 |
A B C |
1.6mm [ 0.062in ] 3.2mm [ 0.125in ] 6.4mm [ 0.25in ] |
Over 600 - 1000 |
A B C |
3.2mm [ 0.125in ] 6.4mm [ 0.25in ] 12.7mm [ 0.5in ] |
Over 1000 - 3000 |
C |
50mm [ 2in ] |
Over 3000 - 5000 | C | 75mm [ 3in ] |
Table 3 - 1 Allowable Strand Damage
Number of Strands | Maximum allowable strands scraped , nicked or severed for Calss 1 , 2 |
Maximum allowable strands scrapesd nicked or severed for Class 3 for wires that will not be tinned before installation |
Maximum allowable atrands scraped , nicked or severed for Class 3 for wires that will be tinned prior to installation |
1 |
No damage in excess of 10% of conductor diameter < Sep 2011 > | ||
2 - 6 | 0 | 0 | 0 |
7 - 15 | 1 | 0 | 1 |
16 - 25 |
3
|
0 | 2 |
26 - 40 | 4 | 3 | 3 |
41 - 60 | 5 | 4 | 4 |
61 - 120 | 6 | 5 | 5 |
121 or more | 6% | 5% | 5% |
![]() |
|
![]() |
|
![]() |
|
![]() |
|
![]() |
|
Contact Person: MrGabriel.chen